29 MHz processor. Using tsc for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 904664k/917504k available (2923k kernel code, 12412k reserved, 1020k data, 168k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay loop... 3153.92 BogoMIPS (lpj=1576960) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) CPU: After generic identify, caps: a7e9f9bf 00000000 00000000 00000000 CPU: After vendor identify, caps: a7e9f9bf 00000000 00000000 00000000 CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 1024K CPU: After all inits, caps: a7e9f9bf 00000000 00000000 00000040 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: Intel(R) Pentium(R) M processor 1600MHz stepping 05 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. NET: Registered protocol family 16 PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 PCI: Using configuration type 1 mtrr: v2.0 (20020519) SCSI subsystem initialized Linux Kernel Card Services options: [pci] [cardbus] [pm] PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: Transparent bridge - 0000:00:1e.0 PCI: Discovered primary peer bus 09 [IRQ] PCI: Using IRQ router PIIX/ICH [8086/24cc] at 0000:00:1f.0 PCI: IRQ 0 for device 0000:00:1f.1 doesn't match PIRQ mask - try pci=usepirqmask PCI: Found IRQ 9 for device 0000:00:1f.1 PCI: Sharing IRQ 9 with 0000:00:1d.2 PCI: Sharing IRQ 9 with 0000:02:02.0 Machine check exception polling timer started. audit: initializing netlink socket (disabled) audit(1114379237.133:0): initialized Installing knfsd (copyright (C) 1996 okir@monad.swb.de). NTFS driver 2.1.22 [Flags: R/O]. Initializing Cryptographic API PCI: Found IRQ 5 for device 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 radeonfb: Retreived PLL infos from BIOS radeonfb: Reference=27.00 MHz (RefDiv=12) Memory=252.00 Mhz, System=200.00 MHz radeonfb: PLL min 20000 max 35000 Non-DDC laptop panel detected radeonfb: Monitor 1 type LCD found radeonfb: Monitor 2 type no found radeonfb: panel ID string: SXGA+ Single (85MHz) radeonfb: detected LVDS panel size from BIOS: 1400x1050 radeondb: BIOS provided dividers will be used radeonfb: Power Management enabled for Mobility chipsets Console: switching to colour frame buffer device 175x65 radeonfb: ATI Radeon Lf DDR SGRAM 64 MB vesafb: probe of vesafb0 failed with error -6 lp: driver loaded but no devices found Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 855PM Chipset. agpgart: Maximum main memory to use for agp memory: 816M agpgart: AGP aperture is 256M @ 0xd0000000 PCI: Found IRQ 5 for device 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 [drm] Initialized radeon 1.11.0 20020828 on minor 0: ATI Technologies Inc Radeon R250 Lf [Radeon Mobility 9000 M9] serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled PCI: Found IRQ 6 for device 0000:00:1f.6 PCI: Sharing IRQ 6 with 0000:00:1f.3 PCI: Sharing IRQ 6 with 0000:00:1f.5 PCI: Sharing IRQ 6 with 0000:02:00.1 parport0: PC-style at 0x3bc [PCSPP(,...)] lp0: using parport0 (polling). io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered elevator: using anticipatory as default io scheduler floppy0: no floppy controllers found loop: loaded (max 8 devices) Intel(R) PRO/1000 Network Driver - version 5.5.4-k2 Copyright (c) 1999-2004 Intel Corporation. PCI: Found IRQ 5 for device 0000:02:01.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:00.0 e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection e100: Intel(R) PRO/100 Network Driver, 3.2.3-k2-NAPI e100: Copyright(c) 1999-2004 Intel Corporation Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) PCI: Found IRQ 9 for device 0000:00:1f.1 PCI: Sharing IRQ 9 with 0000:00:1d.2 PCI: Sharing IRQ 9 with 0000:02:02.0 ICH4: chipset revision 1 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x1860-0x1867, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x1868-0x186f, BIOS settings: hdc:DMA, hdd:pio Probing IDE interface ide0... hda: HTS726060M9AT00, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: TOSHIBA DVD-ROM SD-R9012, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 Probing IDE interface ide2... ide2: Wait for ready failed before probe ! Probing IDE interface ide3... ide3: Wait for ready failed before probe ! Probing IDE interface ide4... ide4: Wait for ready failed before probe ! Probing IDE interface ide5... ide5: Wait for ready failed before probe ! hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 110833010 sectors (56746 MB) native capacity is 117210240 sectors (60011 MB) hda: Host Protected Area disabled. hda: 117210240 sectors (60011 MB) w/7877KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 PCI: Found IRQ 5 for device 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 Yenta: CardBus bridge found at 0000:02:00.0 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.0, mfunc 0x01d21022, devctl 0x64 Yenta: ISA IRQ mask 0x0898, PCI irq 5 Socket status: 30000006 PCI: Found IRQ 6 for device 0000:02:00.1 PCI: Sharing IRQ 6 with 0000:00:1f.3 PCI: Sharing IRQ 6 with 0000:00:1f.5 PCI: Sharing IRQ 6 with 0000:00:1f.6 Yenta: CardBus bridge found at 0000:02:00.1 [1014:0512] Yenta: Using INTVAL to route CSC interrupts to PCI Yenta: Routing CardBus interrupts to PCI Yenta TI: socket 0000:02:00.1, mfunc 0x01d21022, devctl 0x64 Yenta: ISA IRQ mask 0x0898, PCI irq 6 Socket status: 30000006 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard on isa0060/serio0 Synaptics Touchpad, model: 1 Firmware: 5.9 Sensor: 44 new absolute packet format Touchpad has extended capability bits -> multifinger detection -> palm detection -> pass-through port input: SynPS/2 Synaptics TouchPad on isa0060/serio1 serio: Synaptics pass-through port at isa0060/serio1/input0 input: PS/2 Generic Mouse on synaptics-pt/serio0 Advanced Linux Sound Architecture Driver Version 1.0.6 (Sun Aug 15 07:17:53 2004 UTC). PCI: Found IRQ 6 for device 0000:00:1f.5 PCI: Sharing IRQ 6 with 0000:00:1f.3 PCI: Sharing IRQ 6 with 0000:00:1f.6 PCI: Sharing IRQ 6 with 0000:02:00.1 PCI: Setting latency timer of device 0000:00:1f.5 to 64 intel8x0_measure_ac97_clock: measured 49484 usecs intel8x0: clocking to 48000 ALSA device list: #0: Intel 82801DB-ICH4 with AD1981B at 0xc0000c00, irq 6 NET: Registered protocol family 2 IP: routing cache hash table of 8192 buckets, 64Kbytes TCP: Hash tables configured (established 262144 bind 65536) ip_conntrack version 2.1 (7168 buckets, 57344 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team ipt_recent v0.3.1: Stephen Frost . http://snowman.net/projects/ipt_recent/ arp_tables: (C) 2002 David S. Miller NET: Registered protocol family 1 NET: Registered protocol family 17 EXT3-fs: mounted filesystem with ordered data mode. VFS: Mounted root (ext3 filesystem) readonly. Freeing unused kernel memory: 168k freed kjournald starting. Commit interval 5 seconds Unable to find swap-space signature EXT3 FS on hda2, internal journal IBM machine detected. Enabling interrupts during APM calls. apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) ttyS1: LSR safety check engaged! ttyS1: LSR safety check engaged! kjournald starting. Commit interval 5 seconds EXT3 FS on hda5, internal journal EXT3-fs: mounted filesystem with ordered data mode. Unable to find swap-space signature cs: IO port probe 0x0100-0x04ff: excluding 0x4d0-0x4d7 cs: IO port probe 0x0800-0x08ff: clean. cs: IO port probe 0x0c00-0x0cff: clean. cs: IO port probe 0x0a00-0x0aff: clean. Access to /proc/cpufreq is deprecated and will be removed from (new) 2.6. kernels soon after 2005-01-01 Bluetooth: Core ver 2.7 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.6 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM ver 1.3 Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v2.2 PCI: Found IRQ 5 for device 0000:00:1d.0 PCI: Sharing IRQ 5 with 0000:01:00.0 PCI: Sharing IRQ 5 with 0000:02:00.0 PCI: Sharing IRQ 5 with 0000:02:01.0 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 5, io base 0x1800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected PCI: Found IRQ 10 for device 0000:00:1d.1 uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 10, io base 0x1820 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1d.2 PCI: Sharing IRQ 9 with 0000:00:1f.1 PCI: Sharing IRQ 9 with 0000:02:02.0 uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 9, io base 0x1840 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected PCI: Found IRQ 9 for device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB/DBM (ICH4/ICH4-M) USB 2.0 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 9, pci mem 0xc0000000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 initialized, EHCI 1.00, driver 26 Oct 2004 hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ath_hal: module license 'Proprietary' taints kernel. ath_hal: 0.9.12.14 (AR5210, AR5211, AR5212) wlan: 0.8.4.5 (EXPERIMENTAL) ath_rate_onoe: 1.0 ath_pci: 0.9.4.12 (EXPERIMENTAL) PCI: Found IRQ 9 for device 0000:02:02.0 PCI: Sharing IRQ 9 with 0000:00:1d.2 PCI: Sharing IRQ 9 with 0000:00:1f.1 ath0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps ath0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps ath0: mac 4.2 phy 3.0 5ghz radio 1.7 2ghz radio 2.3 ath0: 802.11 address: 00:05:4e:42:15:bf ath0: Use hw queue 0 for WME_AC_BE traffic ath0: Use hw queue 0 for WME_AC_BK traffic ath0: Use hw queue 0 for WME_AC_VI traffic ath0: Use hw queue 0 for WME_AC_VO traffic ath0: Atheros 5211: mem=0xc0210000, irq=9 agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Loading R200 Microcode usb 4-3: new high speed USB device using ehci_hcd and address 2 Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices usbcore: registered new driver usb-storage USB Mass Storage support registered. usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 4-3: USB disconnect, address 2 usb 4-3: new high speed USB device using ehci_hcd and address 4 scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning Vendor: WDC WD16 Model: 00BB-00GUA0 Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete usb 4-3: USB disconnect, address 4 usb 4-3: new high speed USB device using ehci_hcd and address 5 usb 4-3: device descriptor read/all, error -71 usb 4-3: new high speed USB device using ehci_hcd and address 8 usb 4-3: device descriptor read/all, error -71 usb 4-3: new high speed USB device using ehci_hcd and address 13 scsi2 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 13 usb-storage: waiting for device to settle before scanning usb 4-3: USB disconnect, address 13 usb 4-3: new high speed USB device using ehci_hcd and address 18 scsi3 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 18 usb-storage: waiting for device to settle before scanning Vendor: WDC WD16 Model: 00BB-00GUA0 Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi3, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi3, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete usb 4-3: USB disconnect, address 18 usb 4-3: new high speed USB device using ehci_hcd and address 21 scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 21 usb-storage: waiting for device to settle before scanning Vendor: WDC WD16 Model: 00BB-00GUA0 Rev: 0811 Type: Direct-Access ANSI SCSI revision: 00 SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB) sda: assuming drive cache: write through sda: sda1 Attached scsi disk sda at scsi4, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi4, channel 0, id 0, lun 0, type 0 usb-storage: device scan complete usb 4-3: USB disconnect, address 21 usb 4-3: new high speed USB device using ehci_hcd and address 22 usb 4-3: device descriptor read/all, error -71 usb 4-3: new high speed USB device using ehci_hcd and address 23 usb 4-3: device descriptor read/all, error -71